Products
Liquid polymeric ferric sulfate
1 is a kind of inorganic polymer coagulant with superior performance. Its morphology is light yellow amorphous powdery solid, which is easily soluble in water. 10% (mass) aqueous solution is red brown transparent solution, hygroscopic. Polyferric sulfate is widely used in drinking water, industrial water, various industrial wastewater, urban sewage, sludge dewatering and other purification treatment.
Key words:
Liquid polymeric ferric sulfate
Classification:
Description
Product Overview
Jianding independently develops and produces liquid polyferric sulfate, which is widely used in the purification of urban drinking water and industrial circulating water. The main advantages are as follows:
It overcomes the common problem of iron salt flocculants being highly corrosive and causing the treated water to have color.
Compared with ferric chloride, its corrosiveness is greatly weakened, and it can reduce the color and total phosphorus of iron ion content in water;
Small dosage and low water treatment cost;
The treatment effect is stable and is not affected by temperature changes.
Application
It is widely used in the purification of urban drinking water, industrial circulating water, purification of industrial wastewater and urban domestic sewage, and sludge dehydration in chemical, petroleum, mining, papermaking, printing and dyeing, brewing, steel, coal gas, paint, leather, pharmaceuticals, food, electroplating and other industries.
Replace aluminum salts and use them in tap water treatment to eliminate residual aluminum pollution in tap water;
Suitable for removing phosphorus or improving sludge hydrophobicity in domestic sewage treatment plants
 |
Liquid Polyferric Sulfate The production cost is low, the price is low, the operation is convenient, and the sewage can be directly fed. The sales radius is limited and the transportation cost is high, generally by land or air. |
 |
Solid Polyferric Sulfate The production cost is relatively high, and compared with liquid, it has an additional drying process, and water must be added and stirred before use. It has a long shelf life, can be exported, and has a large sales radius by road or air transportation. |
|
project |
Indicators |
|
Appearance |
Reddish brown liquid, no precipitation |
|
Density, g/cm3 (20℃) ≥ |
1.45 |
|
Mass fraction of iron ≥ |
11% |
|
Basicity, % |
8.0~16.0 |
|
Water insoluble matter mass fraction, %≤ |
0.3 |
|
Ph value (1% aqueous solution) |
2.0~3.0 |
How to use polyiron
1. The optimal dosage can be determined according to the different turbidity of the raw water. Generally, for turbid water (turbidity is 100-500 mg/L), 30-50 kg of this product is used per thousand tons. For non-drinking water and high turbidity industrial wastewater, an appropriate amount can be added.
2. When treating industrial wastewater, dilute the first-class polyferric sulfate to 1-2 times of aqueous solution. When the source water concentration is high and the amount of water to be treated is large, it can be added directly. Then, according to the results of the laboratory simulation test, add it according to the optimal process conditions and dosage. After sufficient stirring, coagulation and sedimentation, clear effluent can be obtained.
3. Water treatment plants can also dilute 2-5 times before adding. The dosage can be determined according to the nature of the raw water through production debugging or beaker experiments to determine the appropriate amount of alum flowers. Water treatment plants can use the dosage of other drugs originally used as a reference. Under the same conditions, the dosage of this product is roughly equivalent to that of solid polyaluminum chloride, which is 1/2-1/3 of the dosage of solid aluminum sulfate. If the original liquid product is used, it can be calculated and determined according to the corresponding drug concentration, roughly based on a weight ratio of 1:3.
Contact
Phone:0086-555-8882868
Email:jiandinghuagong@163.com
Address: No. 275 Xinhua Road, Cihu High tech Zone, Huashan District, Ma'anshan City, Anhui Province
Recommend Products
Liquid polymeric ferric sulfate
Polyaluminium chloride (drinking water grade)
Drying ferrous sulfate pentahydrate
Polyaluminium chloride (high purity)
Message
We will contact you within one working day. Please pay attention to your email.
Maanshan Jianding Chemical Co., Ltd.
Phone:0086-555-8882868
Email:jiandinghuagong@163.com
Address: No. 275 Xinhua Road, Cihu High tech Zone, Huashan District, Ma'anshan City, Anhui Province
Want to receive our information in time?
Copyright: Ma'anshan Jianding Chemical Co., Ltd